Atlas LS 14 User Manual
5 English
For precise and clean cutting jobs on roads, sidewalks and floors, the Atlas Copco LSC Cart
for the Cut-off Saw is recommended. The use of the Cart gives a better working posture, and
the cutting depth can be adjusted by means of an arm at the front of the Cart. The Cart is
equipped with water kit. The Cart is not standard equipment.
for the Cut-off Saw is recommended. The use of the Cart gives a better working posture, and
the cutting depth can be adjusted by means of an arm at the front of the Cart. The Cart is
equipped with water kit. The Cart is not standard equipment.
A separate water kit with pressure tank is also available (see the spare parts list).
23(5$7,1*,16758&7,216
6WDUWLQJWKH&XWRII6DZ
The following checks should be made
each time you start to use the Cut-off Saw.
All these checks concern the serviceability
of the Cut-off Saw. Some concern your
safety.
each time you start to use the Cut-off Saw.
All these checks concern the serviceability
of the Cut-off Saw. Some concern your
safety.
1.
Check that the disc is in a good con-
dition and properly attached
dition and properly attached
2.
Clean all safety decals. Replace any
that are missing or cannot be read
that are missing or cannot be read
3.
Inspect the hoses generally for signs
of damage
of damage
4.
Check for fluid leakages
5.
Ensure that the hydraulic couplings
are clean and fully serviceable
are clean and fully serviceable
6.
Ensure that any power source you
plan to use is compatible with the
model of the Cut-off Saw you are
using. See the section Technical
data. Atlas Copco recommends us-
ing an oil flow divider, if the flow
from the power source can exceed
the maximum allowed oil flow (see
the spare parts list)
plan to use is compatible with the
model of the Cut-off Saw you are
using. See the section Technical
data. Atlas Copco recommends us-
ing an oil flow divider, if the flow
from the power source can exceed
the maximum allowed oil flow (see
the spare parts list)
7.
Connect the hoses
8.
Mount the Cut-off Saw in the Cart (if
a Cart is used)
a Cart is used)
9.
Start the power source
10.
Activate the water supply or aspira-
tor if used
tor if used
11.
Place the Cut-off Saw at a right
angle on the surface to be cut and
activate the trigger lever
angle on the surface to be cut and
activate the trigger lever
6WRSSLQJWKH&XWRII6DZ
1.
Release the trigger. Keep a firm grip
on the Cut-off Saw, until the disc has
come to a complete stop
on the Cut-off Saw, until the disc has
come to a complete stop
2.
Stop the power source
3.
Disconnect the hoses and fit the
protective caps to the quick-release
couplings
protective caps to the quick-release
couplings
WARNING
Do not exceed the maximum flow
for the Cut-off Saw as this might
lead to failure of the disc and
damage of the tool.
for the Cut-off Saw as this might
lead to failure of the disc and
damage of the tool.
WARNING
The inertia of the disc is very high.
The Cut-off Saw could move and
thereby injure persons or equip-
ment if placed on the ground before
the disc has come to a complete
stop.
The Cut-off Saw could move and
thereby injure persons or equip-
ment if placed on the ground before
the disc has come to a complete
stop.