Grizzly H8095 User Manual

Model H8095

1500 LB

Steel ATV Jack

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#TR8826 PRINTED IN CHINA

Specifications

Maximum Lifting Capacity .................. 1,500 Lbs.
Lifting Range .............................................6"–18"
Weight ..................................................... 78 Lbs.

If you need help with the Model H8095, call our
Technical Support line at: (570) 546-9663.

Failure to follow these instructions could

result in serious personal injury or death:

1. DO NOT overload this jack beyond its

rated capacity. Overloading can cause

the jack to collapse and drop the load.

2. ALWAYS support the vehicle with appro-

priately rated support stands before

working under it.

3. DO NOT attempt to move the vehicle

while the jack is in use.

4. Use only on hard level surfaces like

concrete or asphalt. Other surfaces are

potentially unstable.

5. Center the load on the jack to maintain

proper balance and stability.

6. DO NOT use jack if it begins leaking

fluid or if it slowly sinks with a heavy

load. These are indications that the jack

needs to be immediately serviced.

Figure 1. Jack controls.

Pump

Handle

Lock

Release

Pedal

Operation

Pump Handle (Figure 1): To raise the jack, rotate
the pump handle clockwise completely, then move
the pump handle up and down. To lower the jack,
slowly rotate the pump handle counterclockwise.

Lock  Release  Pedal  (Figure  1):  This  jack  fea-
tures  a  stepped  lock  system  that  prevents  loads
placed  on  the  jack  from  accidentally  dropping.
When pushed down, the lock release pedal allows
the  operator  to  completely  lower  the  jack  and
bypass the stepped lock system.

Note: The lock pedal will not release if the load
binds against the stepped plate. To remove a
bind, jack the load one or two pumps.