Graco Inc. ti8370a User Manual

To reduce risk of injury, follow this procedure 
whenever you see this symbol throughout this 
manual, Also, perform this procedure whenever 
you:

•

Stop spraying

•

Check or repair any part of this system

•

Install or clean spray nozzle

1.

Turn power switch (K) OFF.

2.

Trigger gun into material hopper.

3.

Open gun air valve.

This sprayer must be grounded. Grounding reduces the 
risk of electrical shock by providing an escape wire for 
the electrical current. The sprayer cord includes a 
grounding wire with an appropriate grounding plug. The 
plug must be plugged into an outlet that is properly 
installed and grounded in accordance with all local 
codes and ordinances.

Check with a qualified electrician or serviceman if 
grounding instructions are not completely understood, 
or if in doubt as to whether the product is properly 
grounded. Do not modify plug provided; if it will not fit 
the outlet, have proper outlet installed by a qualified 
electrician.

•

This equipment requires a 120V AC, 60 Hz, 15A cir-
cuit with a grounding receptacle. Do not use an 
adapter with this product. 

•

Use only an extension cord with an undamaged, 
3-prong plug.

•

For 25 to 50 ft (7.6 to 15.2 m) cords, use 3-wire, 14 

AWG (1.5 mm

2

) minimum.

•

For up to 100 ft. (30.48 m) cord, use 3-wire, 12 AWG 

(2.5 mm

2

) minimum.

Minimum Requirements: 3.5 CFM @ 40 psi or 2.5 CFM 
@ 90 psi (maximum 100 psi)

3/8 x 25 ft minimum airline rated @ 120 psi/min

3500 W (3.5 kW) minimum

ti9165a

ti8371a

ti8528a

ti2810a