Haier 232738 User Manual

This sprayer requires 220-240 VAC, 50/60 Hz, 10A 
circuit with a grounding receptacle. Do not use an outlet 
that is not grounded.

Do not use the sprayer if the electrical cord has a 
damaged ground prong. Only use an extension cord 
with an undamaged 3-prong plug. 

Only use an extension cord with an undamaged 3-prong 
plug. Recommended extension cords for use with this 
sprayer are:

•

15 m (49.2 ft) 1.0 mm

2

•

30 m (88.4 ft) 1.5 mm

2

•

50 m (164.0 ft) 2.5 mm

2

 

ground through connection to a properly 

grounded fluid hose and pump.

Fluid supply container: follow local code.

Solvent pails used when flushing: follow local code. 
Use only conductive metal pails, placed on a grounded 
surface such as concrete. Do not place the pail on a 
nonconductive surface, such as paper or cardboard, 
which interrupts grounding continuity.

Grounding the metal pail: connect a ground wire to the 
pail by clamping one end to pail and other end to ground 
such as a water pipe.

To maintain grounding continuity when flushing or 
relieving pressure: hold metal part of the spray gun 
firmly to the side of a grounded metal pail, then trigger 
the gun.

Motor has a thermal overload switch to shut itself down 
if overheated. 

Smaller-gauge or longer extension cords may 
reduce sprayer performance.

ti2021a

ti2022a

To reduce risk of injury from motor starting unex-
pectedly when it cools, always turn power switch 
OFF if motor shuts down.