Graco 312359J User Manual
Initial System Setup
12
312359J
Initial System Setup
Complete the following steps in the order they are listed,
as they apply to your specific system, for initial system
setup.
as they apply to your specific system, for initial system
setup.
1.
Check your shipment for accuracy. Ensure you have
received everything you ordered. See Component
Identification, page 13, to familiarize yourself with
typical system components.
received everything you ordered. See Component
Identification, page 13, to familiarize yourself with
typical system components.
2.
Mount caster kit, if ordered. See manual 406690 for
instructions.
instructions.
3.
Mount hopper brackets, if ordered. See manual
312747 for instructions.
312747 for instructions.
4.
Loosely mount hoppers, if ordered, on brackets. See
manual 312747 for instructions.
manual 312747 for instructions.
5.
Connect bottom hopper outlet if using a gravity feed
pump. See manual 312747 for instructions.
pump. See manual 312747 for instructions.
6.
Tighten hopper mounting bolts. See manual 312747
for instructions.
for instructions.
7.
Mount and connect agitator(s) and feed pump(s), if
ordered. See manual 312769 for instructions.
ordered. See manual 312769 for instructions.
8.
Mount and connect hopper immersion heater kit, if
ordered. See manual 312747 for instructions.
ordered. See manual 312747 for instructions.
9.
Connect recirculation hose, restrictor valve (includ-
ing knob and nipple), and recirculation tube. Place
in hopper or drum. See manual 312747 for instruc-
tions.
ing knob and nipple), and recirculation tube. Place
in hopper or drum. See manual 312747 for instruc-
tions.
10. Replace USB label (front of control panel) with cor-
rect language version, if needed.
11. Replace Alarms Codes label (under fluid control
valves) with correct language version, if needed.
12. Install hopper/hose heated circulation kit, if ordered.
See manual 313259 for instructions.
13. For non-hazardous location sprayers, connect
power cord (not supplied). See Connect Power
Cord, page 19, for instructions.
Cord, page 19, for instructions.
14. For non-hazardous location sprayers, connect junc-
tion box wiring for immersion or recirculation heat-
ers. See manual 312747 for immersion heater
instructions. See manual 309524 for recirculation
heater instructions.
ers. See manual 312747 for immersion heater
instructions. See manual 309524 for recirculation
heater instructions.
15. For hazardous location sprayers, connect explo-
sion-proof heaters. See Wire Sprayers with Explo-
sion-Proof Heaters, page 21, and manual 309524
for instructions and recommendations.
sion-Proof Heaters, page 21, and manual 309524
for instructions and recommendations.
16. Connect air supply line. See Connect Air Supply,
page 21, for instructions and recommendations.
17. Connect fluid hose assembly, including whip hose
and gun. See Connect Fluid Hose Assembly,
page 22, for instructions. Also connect remote mix
manifold, if ordered. See manual 312749 for instruc-
tions.
page 22, for instructions. Also connect remote mix
manifold, if ordered. See manual 312749 for instruc-
tions.