Graco 332709B User Manual

Replacing a Solenoid

NOTICE

To avoid damaging the circuit boards when

servicing the control box, wear Part No. 112190

grounding strap on your wrist and ground

appropriately.
To avoid electrical component damage, remove all

system power before plugging any connectors.

1. Follow the steps in

2. Remove the screws (56) holding the cover (8)

to the front of the unit.

3. Loosen the screws (124) and remove the

enclosure cover (117).

4. Disconnect the 2 solenoid wires from

J1 on the pump control module. See

5. Remove 2 screws (303) and the solenoid (305).
6. Install the new solenoid (305) with the screws

(303).

7. Connect the 2 solenoid wires to J1

on the pump control module. See

8. Replace the covers (8, 117).

Figure 34 Solenoid Replacement

332709B