Wagner SprayTech 9175 User Manual

 

15

English

    1.  Lock the gun and remove spray tip assembly.  

Submerge suction set into a bucket with appropriate 

cleaning solution.

  3.  While pulling the gun trigger, turn the pump ON (l), 

and turn the PRIME/SPRAY knob to SPRAY to purge 

material from the hose back into the original container.  

  4.  When cleaning solution flows from the spray gun, keep 

holding the trigger and aim the spray gun into the side 

of the waste container (ground gun with a metal 

container if flushing with flammable solvent).  

  5.  Trigger the gun until the fluid flowing out of the gun 

is clear.  You may need to dispose and obtain new 

cleaning solution.

 

  6.  Turn the PRIME/SPRAY knob to PRIME and trigger gun 

once to relieve pressure.

  2.  Place a waste container next to the original material 

container.   Aim the spray gun into the side of the 

original material container and hold the trigger.

Hold trigger

Containers should

be touching

Hold trigger

  •  Hold trigger

  •  Turn pump ON (l)

  •  Turn PRIME/SPRAY knob to SPRAY