Wagner SprayTech 558017 User Manual

ProSpray 3.34 

11

 

Starting operation

VOLUME PUMPED

SELECT-4

MENU-1

The Volume Pumped screen shows the

total number of gallons or liters sprayed 

by the sprayer.

GALLONS         X

MENU-1

LITRES          X

MENU-1

LITRES-2

GALLONS-2

To select the Volume Pumped screen,

press the #4 key.

JOB VOLUME

SELECT-4

MENU-1

The Job Volume screen allows the user

to reset a liter counter to track usage on 

specific jobs.

GALLONS

XXXX

RESET-3

MENU-1

To select the Job Volume screen, press

the #4 key.

UNIT SERIAL #

SELECT-4

MENU-1

The Unit Serial # screen shows the

sprayers serial number.

SER # XXXXXXXXXX

MENU-1

To select the Unit Serial # screen, press

the #4 key.

TIMERS

SELECT-4

MENU-1

The Timers screen shows the total time 

the sprayer has been turned on as well 

as the total time the sprayer has been running (pumping).

ON TIME

RUN TIME

XXXX

XXXX

To select the Timers screen, press the 

#4 key.

JOB TIMERS

SELECT-4

MENU-1

The Job Timers screen allows the user

to reset the “ON TIME” and “RUN TIME”

to track time on specific jobs.

JOB ON

X

RESET-3

MENU-1

JOB RUN

X

RESET-3

MENU-1

To select the Job Timers screen, press

the #4 key. “JOB ON” screen will

appear.  Press #3 to reset.  Press #1 to 

continue to “JOB RUN” screen. Press

#3 to reset.  Press #1 to scroll through 

the remaining menu screens.  

SERVICE TIME

SELECT-4

MENU-1

The Service Time screen allows the user 

to set a service time interval (in hours).  

Below the set time, the screens shows the current amount of 

hours on the sprayer since the last activation of the service timer.  

To select the Service Timer screen, press the #4 key.

SERVICE @    XX

RUN HOURS    XX

To set the service time, press the #2 

(up) and/or the #3 (down) keys to the 

desired time (run hours will increase/decrease in increments of 1 

for each time you press a key).  

When the service time interval is set and met by the run hours, 

the display will show a “Service Required” screen. The pump

will remain functional.  To return to the Main Screen, press the 

#1 key. Doing so will reset the “Service @” and “Run Hours”

displayed on the Service Screen back to 0.

SECURITY CODE

CHANGE-2

MENU-1

The Security Code screen allows the 

user to set a four digit security code 

to prevent unauthorized use of the sprayer. If a security code

has been set, the control system display will ask for the code at 

startup.  If the correct code is entered, the display will show the 

Main Screen and the sprayer will operate.  If the wrong code is 

entered, the display will continue to ask for the correct code and 

the sprayer will be disabled.  To set or change the security code, 

press the #2 key.

ENTER OLD CODE

NUMBER

Enter the old security code number to 

access the screen that allows the code 

change.  If the wrong code is entered, the display will continue 

to ask for the correct code and the security code cannot be 

changed.

ENTER NEW CODE

NUMBER

XXXX

RE-ENTER NEW

NUMBER

XXXX

NEW CODE NUMBER

ACCEPTED

Enter the new security code.  Once the 

new code is entered, the display will 

automatically ask that the new code be 

re-entered for verification. If the same

new code is re-entered, the display will 

confirm that the new code has been

accepted and return to the Main Screen.  

If the new code is re-entered incorrectly, the display will return 

to the “Enter New Code Number” screen and the process will

repeat.

If you forget or misplace your security code, you can contact 

Wagner customer service for assistance.

PRIME

The Prime screen appears when the 

pressure control knob is set at the “MIN”

setting.

RAPID CLEAN

The Rapid Clean screen appears when 

the pressure control knob is set at the 

RAPID CLEAN position and the PRIME/SPRAY valve is in the

PRIME position.