Toro 41235 User Manual

1.  Before servicing or making adjustments, turn PTO 
off, put shift lever in neutral, stop engine, set parking 
brake, and remove key from the switch. 

2.  Prior to servicing sprayer components, determine 
what chemical(s) have been used in the sprayer. Follow 
precautions and recommendations printed on chemical 
container labels or Material Safety Data Sheets when 
servicing sprayer components. Use appropriate protec-
tive equipment: protective clothing, chemical resistant 
gloves, and eye protection. 

3.  Make sure machine is in safe operating condition by 
keeping all nuts, bolts and screws tight. 

4.  Never store the machine or fuel container inside 
where there is an open flame, such as near a water heat-
er or furnace. 

5.  If major repairs are ever needed or assistance is de-
sired, contact an Authorized Toro Distributor. 

6.  If engine must be running to perform maintenance or 
an adjustment, keep clothing, hands, feet, and other 
parts of the body away from moving parts. Keep by-
standers away. 

Safety and Instruction Decals

Numerous safety and instruction decals are affixed to 
the Workman 200 Spray System. If any decal becomes 
illegible or damaged, install a new decal. Part numbers 
are listed in your Parts Catalog. Order replacement de-
cals from your Authorized Toro Distributor. 

Product Records

Insert Operator’s Manual, Installation Instructions and 
Parts Catalog for your Workman 200 Spray System at 
the end of this Chapter. Refer to Operator’s Manual for 
recommended maintenance intervals. Additionally, in-
sert Installation Instructions, Operator’s Manuals, and 
Parts Catalogs for other accessories (e.g. Foam Mark-
ing Kit, Hose Reel Kit) that have been installed on your 
Workman vehicle at the end of this Chapter. 

7.  Disconnect battery before servicing the machine. 
Disconnect negative (–) battery cable first and positive 
(+) cable last. If battery voltage is required for trouble-
shooting or test procedures, temporarily connect the 
battery. Reconnect positive (+) cable first and negative 
(–) cable last. 

8.  Battery acid is poisonous and can cause burns. 
Avoid contact with skin, eyes, and clothing. Protect your 
face, eyes, and clothing when working with a battery. 

9.  Battery gases can explode. Keep cigarettes, sparks, 
and flames away from the battery. 

10.To assure optimum performance and continued 
safety of the machine, use genuine Toro replacement 
parts and accessories. Replacement parts and acces-
sories made by other manufacturers may result in non-
conformance with safety standards, and the warranty 
may be voided. 

Workman 200 Spray System 

Safety and Product Records