Grizzly T25100 User Manual

Model T25100 (Mfg. Since 8/12)

-19-

poor corrosion 
resistance.

1.  Workpiece not properly cleaned/pre-treated 

prior to spraying.

2.  powder under-cured.

1.  thoroughly clean workpiece; research/perform 

pretreatment recommendations for workpiece 
material and powder.

2.  Follow powder manufacturer's curing instructions.

poor impact 
resistance or poor 
flexibility.

1.  powder under-cured.
2.  Workpiece not properly cleaned/pre-treated 

prior to spraying.

3.  Coating too thick.

1.  Follow powder manufacturer's curing instructions.
2.  thoroughly clean workpiece; research/perform 

pretreatment recommendations for workpiece 
material and powder.

3.  Decrease powder coat thickness when spraying.

poor powder 
penetration into 
recessed areas.

1.  poor workpiece ground.

2.  improper spray pattern.

1.  Ensure system grounding clip is making good 

metal-to-metal contact with workpiece.

2.  use a scatter tip that will help direct powder into 

recessed areas. position spray gun so powder has 
a direct path to recessed areas.