Makita GA4543C User Manual

P 4/ 14 

DISASSEMBLING

ASSEMBLING

(2) Disassemble the commutator end of Armature as drawn in Fig. 3.

      Note: This step is required for the models with electronic control system of GA4041C, GA4043C, GA4541C,

                GA4543C, GA5041C, GA5043C.
Fig. 3

1. Pick up three tabs of

    Self lock 6 with tweezers

    to remove it from Armature.

2. Remove Magnet sleeve, 

    Wave washer 6 and 

    Labyrinth rubber ring 22. 

3. Remove Ball bearing 627DDW with 1R269. 

4. Remove Flat washer 7 and

    Insulation washer. 

Self lock 6

Tabs

Tweezers

Wave washer 6

Magnet sleeve

Labyrinth rubber ring 22

Ball bearing 627DDW

1R269

Flat washer 7

Insulation washer

(1) Assemble the commutator end of Armature as drawn in Fig. 4.

      Note: This step is required for the models with electronic control system of GA4041C, GA4043C, GA4541C,

                GA4543C, GA5041C, GA5043C.

2. Press down Self lock 6 until

    Wave washer 6 gets flat.

3. Magnet sleeve is stabilized

    between Self lock 6 and

    Wave washer 6 by the reaction

    force of Wave washer 6.    

1. Return tabs of Self lock 6 to their

    normal shape before assembling. 

    Then, mount Wave washer 6 to

    the commutator end of Armature.

Note: Be careful of their directions.

 

Refer to the drawings in Fig. 4.

Wave washer 6

Magnet sleeve

Self lock 6

Wave washer 6

Magnet sleeve

Self lock 6