Grizzly H8125 User Manual

Model H8125 9.6V Mini Grinder Kit

-9

SECTION 4: OPERATIONS

Charging the Battery

To prevent potential problems during ship-
ment, batteries are usually shipped with
little or no charge. You must charge your
new batteries before initial use.

Note: The time to fully charge a battery is
approximately 3–3

⁄

hours.

To charge the battery:

1. Make sure the AC/DC adapter is not

connected to a power supply.

2. Connect the battery charger to the AC/

DC adapter.

3. Press the two side tabs on the battery

and slide the battery from the grinder.

Read  the  manual  before  operation.
Become familiar with this machine, its
safety  instructions,  and  its  operation
before  beginning  any  work.  Serious
personal injury may result if safety or
operational  information  is  not  under-
stood or followed.

4. Position the flat part of the battery bot-

tom  to  the  front  of  the  charger,  align
the  metal  contacts  on  the  battery  with
the  metal  flanges  in  the  battery  pack,
then  firmly  press  the  battery  into  the
charger.

5. Plug the AC/DC adapter into a 110-

120V power outlet—the green light on
the charger will turn

ON.

Note: DO NOT leave the battery in
the energized charger indefinitely. The
charger will NOT turn

OFF automati-

cally.

6. After 3–3

⁄

hours in the energized char-

ger, the battery will be fully charged.
Remove the battery from the charger
and unplug the AC/DC adapter.

To install the battery:

1. Align the arrows on the battery with the

arrows on the grinder base.

2. Press the battery into the grinder until it

snaps into place.

Make  sure  the  grinder  switch  is
turned  all  the  way  to  the  right  and
is  in  the  "0"  (OFF)  position  before
installing the battery. Failure to heed
this warning could result in serious
personal injury.