Echo X7672240101 Leaflet

1.  Remove spark plug lead. 

2.  Remove blade bolt and nut (and washer, if applicable) farthest 

from engine. 

NOTE Hardware combination and configuration. New bolt will be 

longer than bolt removed from unit.

3.  Select identical new bolt/nut/washer combination from kit con-

tents and secure tip guard onto support bar.  Install hardware in 

original configuration.  

Bolt must be installed into correct hole in tip guard so that tip 

guard does not contact blades and sits flat against support bar.  

99988802000 – (for use with HC-150, HC-155, SHC-225, SHC-225S, SHC-265) tip guard, 2 bolts, 1 nut,   

 

 

1 flange nut, 2 flat washers

99988802010 – (for use with HCA-265) tip guard, 2 bolts, 1 nut, 1 flange nut, 2 flat washers

99988802020 – (for use with HC-225, 235, 245) tip guard, bolt, nut, flat washer
99988802030 – (for use with HC-165, 185) tip guard, 2 bolts, 1 nut, 1 flange nut, 2 flat washers

Instructions: 

Hedge Clipper blades are very sharp.  Touching them may lead to severe personal injury.  Avoid touching 

blades whenever possible, and always wear gloves to protect hands. 

99988802000 – (para usar con HC-150, HC-155, SHC-225, SHC-225S, SHC-265) protector de punta,    

 

 

2 pernos, 1 tuerca, 1 tuerca embridada, 2 aran delas planas

99988802010 – (para usar con HCA-265) protector de punta, 2 pernos, 1 tuerca, 1 tuerca embridada, 2 aran 

 

 

delas planas

99988802020 – (para usar con HC-225, 235, 245) protector de punta, perno, tuerca, arandela plana

99988802030 – (para usar con HC-165, 185) protector de punta, 2 pernos, 1 tuerca, 1 tuerca embridada, 2  
 

 

arandelas planas

Instrucciones: 

4.  Adjust and lubricate blades according to instructions in your operator’s manual.  

5.  Attach spark plug lead. 

Las hojas del cortasetos están muy afiladas.  El contacto 

con las mismas puede producir lesiones personales gra-

ves.  No toque las hojas siempre que sea posible, y lleve 

siempre puestos guantes para protegerse las manos.