Shindaiwa 62640-94313 User Manual

14

Long Term Storage

Whenever the machine will not be used 

for 30 days or longer, use the following 

procedures to prepare it for storage:
n

  Clean external parts thoroughly and 

apply a light coating of oil to all metal 

surfaces.

CAUTION!
Gasoline stored in the carbure-

tor for extended periods can cause 

hard starting, and could also lead to 

increased service and maintenance 

costs.

If the engine becomes sluggish and low on 

power, check and clean the spark arrester 

screen.

WARNING!

Never operate the unit with a damaged 

or missing muffler or spark arrester! 

Operating with missing or damaged 

spark arrester is a fire hazard and 

could also damage your hearing.

1.  With a 3 mm hex wrench remove the 

4 engine cover screws and the engine 

cover. See Figure 33.

2.  With a 4 mm hex wrench remove the 

3 muffler bolts and the muffler. See 

Figure 33.

3.  With a small flat bladed screwdriver 

remove the 2 screws holding the  

spark arrester screen and cover to  

the muffler. See Figure 33.

4.  Remove the screen and clean it with a 

stiff bristle brush.

5.  Inspect the cylinder exhaust port for 

any carbon buildup.

IMPORTANT!

If you note excessive carbon buildup, 

consult with an authorized Shindaiwa 

servicing dealer.

6.  Reassemble the spark arrester, muffler 

and engine cover in the reverse order of 

disassembly.

NOTE

Damage resulting from stale or contaminated 

fuel is not covered by the Shindaiwa warranty 

policy.

n

  Drain all the fuel from the carburetor 

and the fuel tank.

IMPORTANT!

All stored fuels should be stabilized with a 

fuel stabilizer such as STA-BIL™.

n

  Remove the spark plug and pour about 

1/4 ounce of oil into the cylinder 

through the spark plug hole. Slowly pull 

the recoil starter 2 or 3 times so oil will 

evenly coat the interior of the engine. 

Reinstall the spark plug.

n

  Before storing the machine, repair or 

replace any worn or damaged parts.

n

  Remove the air cleaner element from 

the carburetor and clean it thoroughly 

with soap and water. Rinse and dry 

thoroughly, then add a few drops of oil 

and work it in. Reassemble.

n

  Store the machine in a clean, dust-free 

area.

Spark Arrester Screen Maintenance