Sony PCS-G70P User Manual
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\09OPE.FM
masterpage:Left
169
Installing the MCU Software
Installing the MCU Software
Notes on installing the MCU software
• You cannot install the software if the write-protect tab on the Memory Stick
• You cannot install the software if the write-protect tab on the Memory Stick
where the MCU software is stored is set to “LOCK”.
• Once the MCU software is installed in the Communication Terminal, the
software is not used again.
• You cannot install MCU software that was copied to another Memory Stick
with a computer, etc.
1
Open the front panel of the Communication Terminal, and then slide the
power switch on the right to the off position ({).
power switch on the right to the off position ({).
2
Insert the “Memory Stick” containing the PCSA-M3G70 or PCSA-M0G70
MCU software into the Memory Stick slot.
MCU software into the Memory Stick slot.
Insert the “Memory Stick” in the direction of the arrow with the mark facing
upward.
upward.
3
Slide the power switch on the right to the off position (
@
).
The MCU software is installed in the Communication Terminal.
PCSA-M3G70 or PCSA-M0G70 MCU software