Sony PCS-G70P User Manual

Page of 236
184
Using the Display Control
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\09OPE.FM
masterpage:Left
At the beginning of the conference, the mode set for “Broadcast Mode” on 
page 4 of the Communication Setup menu is applied. You can change the 
mode during communication.
1
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu appears.
2
Use the 
V, v, B or b button on the Remote Commander to select 
“Broadcast Mode”, then press the PUSH ENTER button.
Split: Selects the Split mode.
Split (A Fixed): Specifies the picture of the terminal connected first to fix 
in the Split (Fixed) mode.
Split (B Fixed): Specifies the picture of the terminal connected second to 
fix in the Split (Fixed) mode.
Split (C Fixed): Specifies the picture of the terminal connected third to fix 
in the Split (Fixed) mode.
Split (D Fixed): Specifies the picture of the terminal connected fourth to 
fix in the Split (Fixed) mode.
Split (E Fixed): Specifies the picture of the terminal connected fifth to fix 
in the Split (Fixed) mode.
Split (Near End Fixed): Fixes the local picture in the Split (Fixed) mode.
Voice Activate: Selects the Voice Activate mode.
Self Broadcast: Broadcasts the near end (local) party in the Broadcast 
mode.
A Broadcast: Broadcasts the picture of the terminal connected first in the 
Broadcast mode.
B Broadcast: Broadcasts the picture of the terminal connected second in 
the Broadcast mode.
C Broadcast: Broadcasts the picture of the terminal connected third in the 
Broadcast mode.
D Broadcast: Broadcasts the picture of the terminal connected fourth in 
the Broadcast mode.
E Broadcast: Broadcasts the picture of the terminal connected fifth in the 
Broadcast mode.
Stop Broadcast: Stops broadcasting in the Broadcast Mode.
Switching the Broadcast Mode
Display Control
Display
Far
Control
Near
Camera
Broadcast Mode
Split