Sony PCS-G70P User Manual

PCS-G70/G70P

3-863-237-11 (1)

Y:\04C08060_passage\EDIT\09OPE.FM

189

Connecting the External MCU

Press the PUSH ENTER button on the Remote Commander.

The chair control is activated and you can control up to 99 terminals. The chair 
control feature is canceled if you set “Broadcast Mode” to “Chair Release”. 

When you operate incorrectly, the message “MCU operation rejected.” will appear 
on the monitor screen.

Open the Display Control menu.

Use the 

V, v, B or b button to select “Receive” under “Broadcast Mode”.

Use the 

V, v, B or b button to select the number of the terminal you want 

to view in the box under “Terminal”, then press the PUSH ENTER button.

The picture of the selected terminal is displayed on the local screen.

• When no terminal is selected, the picture of the smallest terminal number will be 

displayed.

• The terminal number is assigned to a terminal based on the information on each 

terminal obtained from the MCU.

Open the Display Control menu.

Use the 

V, v, B or b button to select “Broadcast” under “Broadcast Mode”.

Use the 

V, v, B or b button to select the number of the terminal you want 

to broadcast in the box under “Terminal”, then press the PUSH ENTER 
button.

The picture of the selected terminal is displayed on the local screen and is 
broadcast to all terminals.

Open the Display Control menu.

Use the 

V, v, B or b button to select “Broadcast” under “Broadcast Mode”.

Use the 

V, v, B or b button to display “0” in the box under “Terminal”, 

then press the PUSH ENTER button.

The local picture is broadcast to all terminals. The 

 indicator is shown on 

the monitor screen.