Sony PCS-G70P User Manual

28

Turning the System On/Off

PCS-G70/G70P

3-863-237-11 (1)

Y:\04C08060_passage\EDIT\03OVR.FM

• After the power is turned on, the camera moves automatically for trial operation. Be 

careful not to catch your finger.

• If you use force to prevent the camera moving, it may not resume moving and not 

output a signal to the Communication Terminal. In this case, turn off the terminal, and 
turn it on again.

• When you turn on the power of the Communication Terminal for the first time after 

installation, the setup wizard will appear after the self-diagnosis is completed. Set up 
your system following the wizard.

• Used with an optional device especially designed for use with this system, such as the 

Data Solution Box or ISDN Unit, for the first time, the Communication Terminal may 
automatically upgrade the software of the connected device. While the upgrading 
message is displayed on the monitor screen, be sure not to turn off the Communication 
Terminal. Doing so may cause malfunction of the system. System malfunction may 
also occur when a system power-off has been caused by an accidental problem such 
as a power interruption during upgrading. If connection of the Data Solution Box or 
ISDN Unit to the Communication Terminal is not re-established even after the system 
power is recovered, consult a Sony dealer.

IP: 012.345.678.678
ISDN: 012345678956789 

Tokyo

New York

Paris

AUTO

Phone Book

Detail Dial

History

Menu

Information

Dial

Enter the remote party number.