Homelite UT31810 User Manual

Page 8

Remove both screws on the motor housing. Orient
grass shield on the motor housing and twist to lock in
place as shown. Re-install screws to secure grass
shield in place. 

See Figure 2.

•

Rotate the lower portion of the shaft adjustment
collar to the “Unlock” position. 

See Figure 3.

Fig. 2

Fig. 3

Fig. 4

•

Lower shaft should now be free to slide down from
inside the upper shaft. Make sure the shaft is
pulled out to the desired position. 

See Figure 4.

Fig. 5

•

Rotate shaft adjustment collar to the “Lock”
position and tighten securely. 

See Figure 5.