Roland JV-1010 User Manual

fig.0-02

Accepts connection of the supplied AC adapter.

To prevent the inadvertent disruption of power to your unit (should the 
plug be pulled out accidentally), and to avoid applying undue stress to the 
AC adaptor jack, anchor the power cord using the cord hook, as shown in 
the illustration.

These connectors are used to connect the JV-1010 with other devices for sending and receiving MIDI 
messages.
When using these connectors to exchange MIDI messages, set the COMPUTER switch to 

.

 This receives information from other MIDI instruments.

 This sends information from the JV-1010.

 This sends out, unaltered, information received from MIDI IN.

The switch should be set as appropriate for the type of computer connected to the COMPUTER 
Connector, and the software being used (p. 38).
When using the MIDI connectors, set this to 

.

This is for connecting a computer to the JV-1010 using a computer cable (sold separately) (p. 38).
Set the COMPUTER switch to 

 or 

.

These are for stereo (L/R) output of audio signals to an amp or a mixer. For monaural output, 
connect to the left (L) jack.