Roland JV-1010 User Manual

When changing a performance, set the transmit channel of the external 
MIDI device and the Performance Control Channel (Perform Ctrl CH) of the 
JV-1010 to the same channel, then transmit the Bank Select and Program 
Change messages.

Now let’s set the transmit channel on the external MIDI device and the 
Performance Control Channel (Perform Ctrl CH) on the JV-1010 to the same 
channel and try changing the performance.

fig.1-22

Press the VALUE knob and choose the Performance mode 
(

).

Pressing the VALUE knob makes the mode change sequentially. Press the 
knob several times until the PERFORM indicator lights up.

While holding down the VOLUME knob, press the VALUE 
knob.

Switch to the Edit mode.

Turn the CATEGORY/BANK knob to choose 

 

(

).

Turn the VALUE knob and choose the channel.

A value of from 

 to 

, or 

 flashes in the display.

While holding down the VOLUME knob, press the VALUE 
knob. 

The JV-1010 exits Edit mode.

For more information about 
the performance, please refer 
to 

 (p. 42).

When you first take the 
unit out of the box, the 
setting for the Performance 
Control Channel is at 

.