Pelco C607M-E User Manual

Page of 20
C607M-E  (2/09)
7
Description
The RCS Series rack mount power supply consists of a multi-output, indoor, rack mounted power supply that can provide power from a single 
source for 8, 16, or 32 cameras. The RCS Series is designed with transformers that minimize voltage variances across the full range of loads. 
This design incorporates a slightly higher voltage output (26 V) to compensate for losses and accommodates smaller wire gauges over long runs. 
Models are available with 5-, 10-, or 20-amp capacities for VAC, and each model allows for a line input of 115 VAC, 60 Hz or 230 VAC, 50 Hz.
When they are used with integrated systems such as the Spectra
®
 domes or the Esprit
®
 integrated positioning systems, the higher current 
capacity models support pan/tilt and receiver operation in addition to the camera.
Each output on the unit features its own LED power indicator.
All RCS Series models are available with either glass fused or self-resetting poly switch circuit breakers. Consider the following issues when 
selecting the overload protection that is best suited for your system:
Glass fuses provide more protection than circuit breakers because they act faster and are more precise. 
Glass fuses are designed for one-time use and must be replaced if they blow.
The RCS Series rack mount power supply is designed to fit in any standard 19-inch rack, and it may be installed easily with side support rails 
(not supplied).
MODELS
The RCS Series rack mount power supply is available in a 1 rack unit height (1 RU).
All models are available with the optional locking front face plate (RCSFP).
Table A. RCS Models
Model Number
Outputs
Breaker/
Fused
Amperes
Input
Voltage
Output
Voltage
RCS8F5
8
Fused
5
115/230
26
RCS8B5
8
Breaker
5
115/230
26
RCS16F10
16
Fused
10
115/230
26
RCS16B10
16
Breaker
10
115/230
26
RCS16F20
16
Fused
20
115/230
26
RCS16B20
16
Breaker
20
115/230
26
RCS32F20
32
Fused
20
115/230
26
RCS32B20
32
Breaker
20
115/230
26