Panasonic KX-TVA50 User Manual
4.2 KX-TDE, KX-TDA, and KX-TAW Series PBX
Programming for DPT Integration
Programming for DPT Integration
The screen shots shown in this section are for the KX-TDA200. Programming procedures and
availability may vary by PBX model, software version, etc. Refer to the documentation included with
the PBX or consult your dealer for more information.
A group of DPT ports of the PBX connected to a VPS with DPT Integration is called a "VM (DPT) Group". Each
VM (DPT) Group consists of a maximum of 12 ports (24 channels) of the VPS, and each VM (DPT) Group can
be connected to a different VPS.
availability may vary by PBX model, software version, etc. Refer to the documentation included with
the PBX or consult your dealer for more information.
A group of DPT ports of the PBX connected to a VPS with DPT Integration is called a "VM (DPT) Group". Each
VM (DPT) Group consists of a maximum of 12 ports (24 channels) of the VPS, and each VM (DPT) Group can
be connected to a different VPS.
Maximum Number of VM (DPT) Groups
PBX Model
Max. No. of VM (DPT) Groups
KX-TDE100/KX-TDE200
2
KX-TDA600
8
KX-TDA100/KX-TDA200
2
KX-TDA50
1
KX-TAW Series
1
Through PBX system programming, you must assign the VM (DPT) Group and the VM (DPT) extension ports
that will use DPT Integration.
that will use DPT Integration.
1.
Assignment of VM (DPT) Group
a.
Go to the Groups-VM(DPT) Group-Unit Setting screen.
b.
Assign a floating extension number to the VPS.
c.
Click Apply to save the changed data.
Document Version 3.0 2010/06
Installation Manual
97
4.2 KX-TDE, KX-TDA, and KX-TAW Series PBX Programming for DPT Integration