Polycom 2000 User Manual
Polycom RMX 2000 Administrator’s Guide
12-3
Most of the Default IP Service is configured by the Fast Configuration
Wizard, which runs automatically should the following occur:
•
•
First time power-up
•
Default IP Service is deleted, followed by an RMX reset.
For more information, see the RMX 2000 Getting Started Guide, "Procedure
3: First-time Power-up and Connection to MCU” on page
3: First-time Power-up and Connection to MCU” on page
.
Modifying the Management Network
The Management Network parameters need to be modified if you want to:
•
•
Connect directly to the MCU from a workstation
•
Modify routes
•
Modify DNS information
•
Modify the speed of LAN 2 port
To view or modify the Management Network Service:
1
1
In the RMX Management pane, click the IP Network Services (
)
button.
2
In the IP Network Services list pane, double-click the Management
Network (
Network (
) entry.
The Management Network Properties - IP dialog box opens.
Changes made to any of these parameters only take effect when the RMX unit
is reset. An Active Alarm is created when changes made to the system have not
yet been implemented and the MCU must be reset.
is reset. An Active Alarm is created when changes made to the system have not
yet been implemented and the MCU must be reset.