Polycom 2000 User Manual
Polycom RMX 2000 Administrator’s Guide
2-3
The following Video protocols are supported:
•
•
H.261 - the video compression algorithm mandatory to all endpoints.
It is used by endpoints that do not support other protocols.
•
H.263 - a video compression algorithm that provides a better video
quality than H.261. This standard is not supported by all endpoints.
•
H.264 - a video compression standard that offers improved video
quality, especially at line rates lower than 384 Kbps.
Video Resolutions in CP
The RMX always attempts to connect to endpoints at the highest line rate.
If the connection cannot be established, the RMX attempts to connect at
the next highest line rate at its highest supported resolution.
The video resolution is also defined by the Quality settings:
•
The video resolution is also defined by the Quality settings:
•
Motion, when selected, results lower video resolution.
•
Sharpness, when selected, sends higher video resolution.
The combination of frame rate and resolution affects the number of video
resources required on the MCU to support the call.
* SD includes all resolutions above 2CIF (576 x 352 pixels) and below HD (720 x 1280 pixels)..
Table 2-1
Video Resolution by Line Rate, Frame Rate & Video Resources
Maximum
Resolution
Minimum
Line Rate Kbps
Maximum
Frame Rate
Video Resources Required
MPM+
MPM
CIF
128
30
1
1
2CIF/WCIF
256
30
2.66
2
SD
256
15
2.66
2
SD *
256
30
2.66
4
SD *
1024
60
4
Not Supported
HD720p
1024
30
4
4
HD720p
1920
60
8
Not Supported
HD1080p
4096
30
8
Not Supported