Polycom 2000 User Manual

Click the Traps tab.
The RMX-SNMP Properties – Traps dialog box opens.

Traps are messages sent by the MCU to the SNMP Managers when 

events such as MCU Startup or Shutdown occur. Traps may be sent 

to several SNMP Managers whose IP addresses are specified in the 

Trap Destinations box.

10 Define the following parameters:

SNMP Trap Version Specifies the version, either Version1 or Version2c, of 

the traps being sent to the IP Host. Polycom software 
supports the standard SNMP version 1 and 2 traps, 
which are taken from RFC 1215, convention for 
defining traps for use with SNMP:
Note: The SNMP Trap Version parameters must be 
defined identically in the external SNMP application.