Polycom 2000 User Manual

A hardware component’s test status can be viewed in the Diagnostics Test 

Monitoring section before, during and after tests have been initiated. Test 

results will only be displayed after tests are completed. The Diagnostic 

Tests Monitoring section is comprised of three tabs: MCU Monitor, Cards 

Monitor and Error Buffer, which are further described below.

The MCU Monitor tab lists the status of all the cards that can be tested in 

Diagnostic Mode. Described below are the columns:

  

The card’s slot number, i.e. 5 - slot where the RTM IP 
card resides.

Indicates the number of tests that the card passed 
successfully.

Indicates the number of tests that the card failed.

The card’s current test status: No test running or Test in 
progress.