Sony WRT-808A User Manual
7
US
3
POWER/BATT indicator
4
AF/PEAK indicator
5
Input LEVEL control
6
Channel select
switches
7
RF power
output switch
1
Microphone
connector
2
POWER switch
Battery compartment
Microphone
release button
(under side of
the unit)
release button
(under side of
the unit)
Parts Identification
1
Microphone connector
Connect to a dynamic microphone which has a XLR type
connector.
connector.
2
POWER switch
Turns the power of the transmitter ON or OFF.
3
POWER/BATT indicator
When turning on the unit, the POWER/BATT indicator
lights in green. While in operation, the LED indicates the
battery condition.
See “Power Supply” on page 8.
lights in green. While in operation, the LED indicates the
battery condition.
See “Power Supply” on page 8.
4
AF (audio frequency) /PEAK indicator
The AF/PEAK indicator lights in green when the supplied
audio frequency level is over the reference level. It lights in
red when the signal reaches the maximum level.
red when the signal reaches the maximum level.
5
Input LEVEL control
Controls the input attenuation level.
“–60” position provides 0 dB attenuation, and “–10”
position provides 50 dB attenuation.
“–60” position provides 0 dB attenuation, and “–10”
position provides 50 dB attenuation.
6
Channel select switches
Select the transmitting channel.
See “Channel Setting” on page 9.
See “Channel Setting” on page 9.
7
RF power output switch
In normal use, set the switch to “50”.
See “Use of RF power output switch” on page 11.
See “Use of RF power output switch” on page 11.