Tascam D00871320A User Manual
Recording
24
TASCAM DP-01 Owner’s Manual
S
ta
rtin
g
g
out with your DP-01
Recording
The DP-01FX and
DP-01FX/CD con-
DP-01FX/CD con-
tain internal input effects proces-
sors (
sors (
MULTI
). See “DP-01FX
Appendix” on page 62 for details.
When you’ve connected a source, and assigned the inputs to tracks,
you’re ready to start recording.
you’re ready to start recording.
1
Press the
REC
key of the track(s) you’re going to record on, which start
to flash slowly (this process is called “arming the track(s)”.
2
Press and hold the
RECORD
key and press the
PLAY
key.
The
RECORD
key indicator lights red, and the
PLAY
indicator lights
green. The track
REC
indicators stop flashing and light steadily.
3
Press
STOP
when you’ve finished recording.
4
To return to the place where you started recording, press and hold
down the
down the
STOP
key, and press the
F FWD
(
LRP
= Last Recording Posi-
tion) key.
To return to the zero point, press and hold down the
STOP
key and
press the
REW
(
RTZ
= Return To Zero) key.
5
Press
PLAY
to start playback of the recorded tracks.
The faders and
other mixer controls
other mixer controls
adjust the output level of the
recorded when playing back
recorded tracks.
recorded when playing back
recorded tracks.
Use the track fader(s) and the red
MASTER
fader to adjust the level of
what you hear.
The pan controls position the track in the stereo “image” you hear in
the left and right speakers (or headphones). The center position is
marked by a “click” when you turn the knob.
the left and right speakers (or headphones). The center position is
marked by a “click” when you turn the knob.
You can change the
EQ control point of
EQ control point of
the high and low equalization con-
trols. See “EQ settings” on page 31
for details.
trols. See “EQ settings” on page 31
for details.
The
EQ HIGH
and
EQ LOW
equalization controls work in a similar way
to the bass and treble tone controls on a stereo system. The center
“click” position of the knob means there’s no cut or boost for that con-
trol.
“click” position of the knob means there’s no cut or boost for that con-
trol.
You can re-record the track if you’re not happy with it by going back to
the original point and repeating the process.
the original point and repeating the process.
When you’re happy with your recording, you can un-arm the track(s)
(“safe” them) and arm and record on other tracks. Remember to re-
assign the inputs as well as arming the tracks.
(“safe” them) and arm and record on other tracks. Remember to re-
assign the inputs as well as arming the tracks.
Press the
REW
or
F FWD
keys for a short while and then release them
to move backwards or forwards through your recording (like a tape
recorder). Press and hold these keys to increase the rewind or fast for-
ward speed. Press
recorder). Press and hold these keys to increase the rewind or fast for-
ward speed. Press
STOP
to stop (again, like a tape recorder).
Figure 1.8: Recording tracks
DP-01_OM_E.book 24 ページ ２００５年６月１３日 月曜日 午後７時１４分