TEAC teac User Manual

Connecting a commercially available timer to your audio setup lets 
you wake up to your favorite music or start recording at specified 
times.

<  The source for timer playback must be CD, TAPE or USB. Timer 

playback does not work with external devices connected to the 
LINE inputs. 

< The timer recording source can only be an external device 

connected to the LINE inputs. And the timer recording can only 
record to cassette tape.

Referring to the illustration below, connect your audio equipment.

Wall socket

To make a timer-controlled
recording of a radio program,
set your tuner as required.

Set the input/output selectors
and other options to their 
proper positions.

Signal flow
during 
playback

Signal flow
during 
recording

Q Turn off the power of all equipment before making 

<  Read the instructions of each component you intend to use with 

this unit.

< Be sure to connect each plug securely. To prevent hum and 

noise, do not bundle the connection cords.

 

 

<  The source for timer playback must be CD, TAPE or USB. Timer 

playback does not work with an external device connected to the 
LINE input. 

available audio timer (see left column).
Make sure that the outlet that the timer is plugged into is receiv-
ing power when it is being used. 

e Set the REV MODE switch to the desired position. To make 

both sides play continuously, set the REV MODE switch to 
the p position.

e Set the DOLBY NR switch. (page 10).

Playback always starts from “side A”.

“TIMER” appears on the AD-RW900’s display.