Fluke 41B User Manual
Printing (Model 41B)
43
p
Printing (Model 41B)
Pressing
p
sends data for the present screen to a printer. Printer type
compatibility is selected on the configuration screen as Epson or HP.
The Tester displays PRNT and the following message appears:
* PRINTING *
PRESS ANY KEY TO STOP
Press any key to abort printing; all keys then return to their normal functions.
s
Sending to a Printer or PC (Model 41B)
Press
s
to start outputting calculated results to the printer or PC. Model
41B stops outputting after it has sent a single set of calculated results. At
9600 baud, the Tester requires a few seconds to output a typical set of
calculated values (1120 bytes).
9600 baud, the Tester requires a few seconds to output a typical set of
calculated values (1120 bytes).
Note
Do not press
p
or
s
while printing or using FlukeView 41
software. In either case, pressing
p
or
s
disrupts
communications.
Using PC Software with the Tester (Model 41B)
FlukeView
41 software is provided for Windows. Refer to the operating
instructions provided with the software.