Panasonic 35 User Manual

Getting started

Rear panel

1. Plug in the connection cable.

2. Connect the LED head to the connection cable.

3. Remove the protective cap from the LED head.

Set the LED jig in place.

<Reference> Heat dissipation device (aluminium)

(A metal fixture attached to the head)

If the LED head is not fixed to a jig, the LED head can become very hot during irradiation. For this reason, do

not touch the head directly with your hands during irradiation.

The rise in LED temperature depends on the duration

of irradiation time and the interval between irradiations.

If the temperature increases beyond a certain point an

alarm will be generated. In the event of such

overheating, increase the size of the heat dissipation

fixture, or add fins to it.

Warning

M6 (5mm D)

2-M4 (5mm D)