Panasonic EY6506 User Manual

- 6 - 

When attaching or removing a bit, 

disconnect battery pack from tool or 

place the switch in the center posi-

tion (switch lock).

 1. Hold the collar of quick connect chuck 

and pull it against the driver.

 2. Insert the bit into the chuck.
 3. The bit holder will return to its original 

position when it is released.

 4. Pull the bit to make sure it does not 

come out.

 5. To remove the bit, pull back on the bit 

holder in the same way.
CAUTION:

If the bit holder does not return to its 

original position or the bit comes out 

when pulled on, the bit has not been 

properly attached. Make sure the bit 

is properly attached before use.

 1. To connect the battery pack:

Insert the battery pack. It snaps into 

place to indicate proper connection.

 2. To remove the battery pack:

Press the two buttons on the sides 

of the battery pack. Slide the battery 

pack out of the tool body.

(Forward ( ), Switch lock, Reverse ( ))

Do not operate Forward/Reverse 

lever until the bit comes to a com-

plete stop.

 1. Push the lever for forward rotation.
 2. Depress the trigger switch slightly to 

start the tool slowly.

 3. The speed increases with the amount 

of depression of the trigger for efficient 

tightening of screws. The brake oper-

ates and the bit stops immediately 

when the trigger is released.

 4. After use, set the lever to its center po-

sition (switch lock).

 1. Push the lever for reverse rotation. Check 

the direction of rotation before use.

 2. Depress the trigger switch slightly to 

start the tool slowly.

 3. After use, set the lever to its center po-

sition (switch lock).

To eliminate excessive tempera ture 

increase of the tool surface, do not oper-

ate the tool continu ously using two or 

more battery packs. Tool needs cool off 

time before switching to another pack.

 

 

Charge the Ni-MH battery fully before 

storage in order to ensure a longer 

service life.

 

 

The ambient temperature range is be-

tween 0°C (32°F) and 40°C (104°F).

If the battery pack is used when the 

battery temperature is below 0°C 
(32°F),  the tool may fail to function 

properly.  In that case, charge the 

battery until charging is completed for 

appropriate functioning of the battery.

   When battery pack is not in use, keep it 

away from other metal objects like: paper 

clips, coins, keys, nails, screws, or other 

small metal objects that can make a con-

nection from one terminal to another.

   Shorting the battery terminals together 

may cause sparks, burns or a fire.