Ridgid 600 User Manual

2

• Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents.

• Do not operate tools in explosive atmospheres,

such as in the presence of flammable liquids,
gases or dust. Tools create sparks which may ignite
the dust or fumes.

• Keep bystanders, children, and visitors away while

operating a tool. Distractions can cause you to lose
control.

• Keep floors dry and free of slippery materials

such as oil. Slippery floors invite accidents.

• Double Insulated tools are equipped with a polar-

ized plug (one blade is wider than the other). This
plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified elec-
trician to install a polarized outlet. Do not change
the plug in any way. Double Insulation      elim-
inates the need for the three wire grounded power cord
and grounded supply system.

• Avoid body contact with grounded surfaces. There

is an increased risk of electrical shock if your body is
grounded.

• Do not expose electrical tools to rain or wet con-

ditions. Water entering a tool will increase the risk of
electrical shock.

• Do not abuse cord. Never use the cord to pull the

plug from an outlet. Keep cord away from heat, oil,
sharp edges or moving parts. Replace damaged
cords immediately. Damaged cords increase the
risk of electrical shock.

• When operating a tool outside, use an outdoor

extension cord marked “W-A” or “W”. These cords
are rated for outdoor use and reduce the risk of elec-
trical shock.

• Use proper extension cords. (See Chart) Insufficient

conductor size will cause excessive voltage drop and
loss of power.

• Keep all electric connections dry and off the

ground. Do not touch plugs or tool with wet hands.
Reduces the risk of electrical shock.

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medications. A moment of inat-
tention while operating power tools may result in
serious personal injury.

• Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.

• Avoid accidental starting. Be sure switch is OFF

before plugging in. Plugging in tools that have the
switch ON invites accidents.

• Remove adjusting keys or wrenches before turning

the tool ON. A wrench or a key that is left attached to
a rotating part of the tool may result in personal injury.

• Do not overreach. Keep proper footing and bal-

ance at all times. Proper footing and balance enables
better control of the tool in unexpected situations.

• Use safety equipment. Always wear eye protec-

tion. Dust mask, non-skid safety shoes, hard hat, or
hearing protection must be used for appropriate con-
ditions.

• Use clamp or other practical way to secure and

support the workpiece to a stable platform. Holding
the work by hand or against your body is unstable and
may lead to loss of control.

• Do not force tool. Use the correct tool for your

application. The correct tool will do the job better and
safer at the rate for which it is designed.

• Do not use tool if switch does not turn it ON or

OFF. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.

18 AWG

16 AWG

16 AWG

18 AWG

16 AWG

14 AWG

16 AWG

16 AWG

14 AWG

14 AWG

12 AWG

NOT RECOMMENDED