Sony MDS-NT1 User Manual

GB

1

2

3

4

•

Full performance of the MD deck is not guaranteed
when it is connected to the  computer through a
USB hub or USB extension cord. Be sure to
connect the MD deck directly to the computer with
the supplied USB cable.

•

Do not connect the supplied AC power adaptor to a
switched AC outlet (e.g., on an amplifier).

•

Use only the supplied AC power adaptor. Do not
use any other AC power adaptor.

Polarity of the plug

The shielded interface cable recommended in this
manual must be used with this equipment in order to
comply with the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.

•

Before outputting sound through the headphones, it
is recommended that you turn the volume down
completely, and then gradually turn up the volume
to the desired level while listening to the sound.

1

Connect this jack to a wall outlet via the supplied

AC power adaptor to power the MD deck.

2

Connect this port to a USB port on your

computer with the supplied USB cable.

3

Connect a headphones plug to this jack.

Turn the PHONE LEVEL control to adjust the

volume of the connected headphones.

4

Connect active speakers, etc. to this jack with the

supplied audio connecting cord (stereo mini-plug

×

1 

y stereo mini-plug 

×

1) or optional audio

connecting cord (stereo mini-plug 

×

1 

y phono

plug 

×

2).

or