Ryobi FL1800 User Manual

Page 3

■ Use clamps or other practical way to secure and

support the workpiece to a stable platform. Holding
the work by hand or against your body is unstable and
may lead to loss of control.

■ Do not force tool. Use the correct tool for your appli-

cation. The correct tool will do the job better and safer
at the rate for which it is designed.

■ Do not use tool if switch does not turn it on or off. A

tool that cannot be controlled with the switch is danger-
ous and must be repaired.

■ Disconnect battery pack from tool before making any

adjustments, changing accessories, or storing the
tool.  Such preventive safety measures reduce risk of
starting the tool accidentally.

■ Store idle tools out of reach of children and other

untrained persons. Tools are dangerous in the hands
of untrained users.

■ When battery pack is not in use, keep it away from

other metal objects like: paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
sparks, burns, or a fire.

■ Maintain tools with care. Keep cutting tools sharp

and clean. Properly maintained tools, with sharp cutting
edges are less likely to bind and are easier to control.

■ Check for misalignment or binding of moving parts,

breakage of parts, and any other condition that may
affect the tool's operation. If damaged, have the tool
serviced before using. Many accidents are caused by
poorly maintained tools.

■ Use only accessories that are recommended by the

manufacturer for your model. Accessories that may
be suitable for one tool, may create a risk of injury when
used on another tool.

■ Tool service must be performed only by qualified

repair personnel. Service or maintenance performed
by unqualified personnel could result in a risk of injury.

■ When servicing a tool, use only identical replace-

ment parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow Maintenance Instructions may create a
risk of shock or injury.

■ Know your power tool. Read operator's manual

carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
tool. Following this rule will reduce the risk of electric
shock, fire, or serious injury.

■ USE ONLY THE CHARGER RECOMMENDED FOR

USE WITH YOUR FLASHLIGHT. Do not substitute any
other charger. Use of another charger could cause
batteries to explode causing possible serioous injury.

■ Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.

■ Do not place battery tools or their batteries near fire

or heat. This will reduce the risk of explosion and
possibly injury.

■ Do not charge battery tool in a damp or wet location.

Following this rule will reduce the risk of electric shock.

■ For best results, your battery tool should be charged

°

°

Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden
wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

■ Under extreme usage or temperature conditions,

battery leakage may occur. If liquid comes in contact
with your skin, wash immediately with soap and
water, then neutralize with lemon juice or vinegar. If
liquid gets into your eyes, flush them with clean
water for at least 10 minutes, then seek immediate
medical attention. Following this rule will reduce the risk
of serious personal injury.

Batteries vent hydrogen gas and can explode in the
presence of a source of ignition, such as a pilot light. To
reduce the risk of serious personal injury, never use any
cordless product in the presence of open flame. An
exploded battery can propel debris and chemical. If
exposed, flush with water immediately.

Never use a battery pack that has been damaged or
received a sharp blow. A damaged battery pack is
subject to explosion. Properly dispose of a damaged
battery pack immediately. Failure to heed this warning
can result in serious personal injury.