StorageTek 96127 User Manual
96127
Second Edition
9
StorageTek Proprietary
Installation
3. Connect the other end of the fibre cable(s) to the Host Bus Adapter (HBA).
See example below.
Note: Refer to StorageTek’s Interop Tool for the latest connectivity
information.
If necessary, refer to the 200/300 Series Installation Guides and User Guides
or to BladeStore’s Installation, Operation, and Maintenance Guide to learn
how to route the drive interface cables to the drive tray/blade tray ESMs.
or to BladeStore’s Installation, Operation, and Maintenance Guide to learn
how to route the drive interface cables to the drive tray/blade tray ESMs.
The following example shows a drawing of a BladeStore cabling configuration
to help you install this particular storage system in a non-StorageTek cabinet.
For most FlexLine™ 200/300 Series storage system configurations, however,
refer to the Hardware Cabling Guide (p/n EH14782), which depicts most of the
configurations shipped from the factory.
to help you install this particular storage system in a non-StorageTek cabinet.
For most FlexLine™ 200/300 Series storage system configurations, however,
refer to the Hardware Cabling Guide (p/n EH14782), which depicts most of the
configurations shipped from the factory.
Additional information to assist with your installation may be found on the
engineering web pages. Scroll down to find links to: tuning, zoning, snapshot,
cabinet information, and alternate configurations. Access these web page
links by going to
engineering web pages. Scroll down to find links to: tuning, zoning, snapshot,
cabinet information, and alternate configurations. Access these web page
links by going to
http://gandalf.stortek.com/ctp/
LC to LC Duplex FC cables