Vector VEC37R User Manual

• Recharges from 12 volt DC accessory outlet using DC adapter

• Corded function allows for 12 volt corded use while charging

• Small, swivel “eyeball” area light provides  up to 15 hours of operation

• Powerful, prefocused, replaceable quartz halogen bulb in spotlight

• Rubber safety guard (bezel) protects spotlight

• Recharges from North American Standard 110/120 volt AC, 60 Hz, AC outlet

• Three-way power switch - spotlight, off and area light

• Comfortable 2 position adjustable handle

• Adjustable, folding stand provides stability on tabletops and other flat surfaces

A three-position switch (spotlight, off, area light) controls on/off operation of both lights. The 

spotlight can be continuously lit for up to 25 minutes on a full battery charge. The area light can 

be lit for up to 15 hours on a full battery charge. The unit may  be operated during DC recharge 

only. Figure 1 shows locations of  the handle, adjustable stand. Figure 2 rear view, shows spot-

light/off/area light switch, area light and handle lock button.

The handle adjusts to two different positions. The handle is released from either locked position 

by pressing on the handle lock button (located near two handle screws) and rotating the handle 

to the new position.  When the handle is close to the body of the light (folded) the Rescue Spot is 

carried with the weight of the unit below the handle. When the handle is rotated perpendicular  

to the body of the unit, the unit is carried pistol-style with the unit’s weight on top.  It is your choice 

of operating positions, depending on your needs and comfort.

Charging or operating with 2 volt DC Adapter - Plug the DC fused recharge/power 

adapter (included) into the barrel receptacle on the back of the spotlight body, and then insert 

the 12 volt DC plug into the 12 volt DC outlet of your vehicle or other 12 volt DC power source.  

Make sure the locking trigger switch is in the off position. Allow approximately 3 hours charging 

time, if the engine is running. You may use the spotlight while its internal battery is recharging.
Spotlight can operate directly with a DC power cord - Operation from external 12 

volt DC source, with at least 10 amp capacity, will allow for area light or spotlight operation and 

internal battery to charge simultaneously.

AREA LIGHT

AREA LIGHT/

SPOTLIGHT SWITCH

RUBBER BEZEL

HANDLE LOCK 

BUTTON

WORK STAND

HOUSING SCREWS

FOLDED HANDLE

AREA LIGHT

HANDLE LOCK 

BUTTON

2 POSITION  

ADJUSTABLE HANDLE

RECHARGE  

PORT AND PLUG