Norcold N62X User Manual

DC voltage normal

DC voltage higher than 15.4 volts

DC voltage lower than 10.5 volts

AC power to AC heater

DC power to divider heater

DC power to gas valve

DC power to ignition circuit

DC power to
light switch

Sensing burner flame

Food compartment light 
is off and door is closed

Thermistor sensing 
fin temperature

Screen 6 provides a way to erase stored fault history
from memory. To erase stored fault history:

1.

Press and hold the 

 button when 

 and

 display.

2.

Release the 

 button when 

 and 

display.

3.

Wait five seconds.

4.

Press and hold the 

 button until 

 and

 display again.

Press the 

 button to bring up screen 7.

Screen 9 display power board DC voltage status using
lighted LED segments. The illustration below provides
DC voltage status and assigned LED segments. If DC
voltage at the power board within normal range (10.5
to 15.4 Vdc), LED segment 4 will be on.

Screen 7 displays "live" power board inputs using
lighted LED segments. The illustration below provides
"live" inputs information and assigned LED segments. If a
power board input is active or "live", its  assigned
LED will light.

Screen 8 display "live" power board outputs using
lighted LED segments. The illustration below provides
"live" outputs information and assigned LED segments.
If the power board output is active or "live," the
assigned LED will light.

Press the 

 button to bring up screen 8.

Press the 

 button to bring up screen 9.

Press the 

 button to return to screen 1.

Errata Sheet, 01/16/04