Norcold N82X User Manual

The Diagnostic Mode uses ten diagnostic channels,
commonly known as "screens", to display "live"
inputs, outputs, and fault history. Each screen is
identified by a number, which shows in the optical
control assembly display. See Figure 47.

The N64X/N84X optical control display uses a dual 7-
segment LED module to display the screen number
and diagnostic information. Information made up of four
letters or digits displays in an alternating sequence.
Fault history, "live" inputs, and outputs is presented
using LED segments. The diagnostic LED segments, if
present, display to the right of the screen number.
Diagnostic LED segments identification numbers. See
Figure 48.

Exiting the Diagnostic Mode
To exit the Diagnostic Mode:

1.

Press and hold 

 and 

 buttons at the

2.

Release the 

 and 

 buttons as soon as the

display shows 

.

Turning the refrigerator OFF then back ON also exits
the Diagnostic Mode.

Display

Accessing the Diagnostic Mode
To access the Diagnostic Mode:

1.

Press and hold both the 

 and 

 buttons at

2.

Release the 

 and 

 as soon as screen

 displays.

3.

A few seconds later, 

 displays.

Changing Screens
To change screens, press and hold the 

 button

until the next screen displays.

ON Light