Sennheiser MO 2000 Set User Manual

8

To mount two central units into a rack:

왘

Place the two central units side by side upside-down onto a flat surface.

왘

Align the jointing plate 

 

over the holes in the bottom sides of the central

units.

왘

Secure the jointing plate 

 

to the central units using eight of the supplied

recessed head screws (M 3x6).

왘

Hook the two rack mount “ears” 

 

to the front panels of the central units.

왘

Secure the rack mount “ears” to the central units using two of the sup-
plied recessed head screws (M 3x6) respectively.

왘

Slide the central units into the 19” rack.

왘

Secure the rack mount “ears” to the rack.

To mount only one central unit into a rack:

왘

Hook the two rack mount “ears”

 

to the front panel of the central unit.

왘

Secure the rack mount “ears” to the central unit using two of the supplied
recessed head screws (M 3x6) respectively.

왘

Secure the blanking plate

 to one of the rack mount “ears”

 using two

of the supplied recessed head screws (M 6x10).

왘

If you are not front mounting the BNC output connector, insert the two
blanking plugs

 into the holes of the blanking plate.

왘

Slide the central unit into the 19” rack.

왘

Secure the rack mount “ears” to the rack.

Connecting the mains unit

왘

Connect the supplied mains unit to the socket

 

(DC IN). Use the cable

grip

 to secure the power supply DC cable.

왘

Connect the suitable adapter to the mains unit

.

왘

Connect the mains unit

 to the mains.

The device switches on automatically.

Connecting the amplifier

The audio outputs are available as a balanced XLR-3M output 

 

and an

unbalanced BNC output 

, allowing you to simultaneously connect two

devices (amplifier, etc.). Both outputs deliver the same output voltage, are
short-circuit proof and decoupled from each other. 

왘

Connect the amplifier/mixing console to the balanced XLR-3M output

or the unbalanced BNC output

. 

For details on balanced or unbalanced connection, see “Connector assign-
ment” on page 12.