Revolabs 10-FLX2-002-POTS User Manual
22
Conference Call
1.
Press the
„Enter‟ key to access the Active Call Menu
and select
„Conference‟.
2.
Create the second call by selecting Dialer, Contacts,
or Recent.
or Recent.
3.
Initiate the second call.
4.
After the second call has been established, merge the
two calls by pressing the
two calls by pressing the
green „Call‟ button again.
Call Waiting
1.
While a call is active and the FLX2 System receives
a second call, the Speaker or Dialer will play the call
waiting indication tone.
a second call, the Speaker or Dialer will play the call
waiting indication tone.
2.
If available, the FLX Dialer displays the incoming
caller number and name.
caller number and name.
3.
The FLX Dialer presents the user with the option to
„Answer‟ the call.
„Answer‟ the call.
4.
If no action is taken and the second call aborts, the
FLX Dialer will show the previous Active call screen
again.
FLX Dialer will show the previous Active call screen
again.
5.
When answering the second call, the first call is put
on hold. Use the green „Call‟ button to resume the
first call, ending the second.
on hold. Use the green „Call‟ button to resume the
first call, ending the second.
NOTE: When using the red ‘End Call’ button while another caller is on hold, that caller will
remain on-hold in the telephone network. The FLX2 Conference Phone will not be able to
retrieve that call.
Charging Components during a Call
Each system component will respond differently when placed in or out of the charger
during an active telephone call. The following is a description of what can be expected.
during an active telephone call. The following is a description of what can be expected.
Dialer
When the Dialer is placed into the Charger Base
during a call in „speaker mode‟, the call
will not be affected and the Dialer will enter its charging mode.
When the Dialer is placed into the Charger Base
during a „handset mode‟ call, the call
will end and the Dialer will enter its charging mode.