Hobart Welding Products 120 User Manual
OM-210 088 Page 23
5-5.
Cleaning Or Replacing Piecemaker 14-A Gun Liner
Ref. ST-801 995
1/16 in
To Reassemble Gun:
Insert new liner.
Push liner against quick-connect
plug, and tighten set screw.
plug, and tighten set screw.
Cut liner off so that 3/4 in (19.05
mm) sticks out of head tube.
mm) sticks out of head tube.
Install adapter, contact tip, and
nozzle.
nozzle.
Lay gun cable out straight
before installing new liner.
before installing new liner.
Head Tube
1/2 in
Remove liner.
Remove nozzle, contact tip,
adapter, and wire outlet guide.
adapter, and wire outlet guide.
Blow out gun casing.
Y
Disconnect gun from unit.
Tools Needed:
1/16 in
Loosen liner set screw.
Quick-Connect Plug
NOTE: Burrs or bent wire from spring
may make it difficult to feed wire
through the liner. Remove burrs
may make it difficult to feed wire
through the liner. Remove burrs