Genie 3022 User Manual

21

1a.

Using the bracket as your guide, mark the hole positions on the door 
frame. Center the bracket on the door, as high as possible, preferably 
the top edge. 

1b.

Secure the bracket:

Preferred method: Drill 9/32" pilot holes completely through the 

 

door. Secure the bracket with 1/4"-20 carriage bolts and nuts 

 

(not supplied). 
Alternate method: Drill 1/8" pilot holes partially through the door. 

 

Secure the bracket with 1/4" x 1-1/2" (minimum length) lag screws 

 

(not supplied).

2a.

 

Screw drive models: 

 

One-piece doors must be connected to a straight door arm as shown.

2b.  Chain and Belt models: 

 

One-piece doors must be connected to a straight door arm.

3.

 

Secure the straight door arm to the door bracket with clevis pin and 
cotter pin.

TYPICAL

ONE-PIECE DOOR

INSTALLATION

Clevis Pin

Door Bracket

Cotter Pin

Straight door arm