Furuno DS-80 User Manual

7

1.5

Main Menu Operation

Functions of the DS-80 are selected

through the menu.

1. Press the [MENU] key to open the

menu.

MENU

DISTANCE RUN DISPLAY

DEMO
SYSTEM MENU
SYSTEM MENU2

2. Press the Omnipad at

or

to select

a menu item (current selection is

highlighted) and press the [ENT] key.

For example, when DISTANCE RUN

DISPLAY is selected the following

display appears. Distance run is a form

of contact closure, 200 pulses/nm. To

select IEC 61162 sentence, see

paragraph 1.6.1.

DISTANCE RUN DISPLAY

DATA DISPLAY

CONTACT CLOSURE

RESET OFF
SET
0.00nm

ENT

SET

3. Press the Omnipad at

or

to select

the menu item desired and press the

[ENT] key. For example select RESET.

DISTANCE RUN DISPLAY

DATA DISPLAY
CONTACT CLOSURE
RESET OFF
SET

OFF

ON

4. Press the Omnipad at

or

to select

the menu option desired and press the

[ENT] key.

5. Press the [MENU] key twice to close the

menu. (Some menus require only a

single pressing of the [MENU] key.)

To enter numerical data

Some menus require input of numeric data.

This is done with the Omnipad.

1. Select the digit or sign (+ or -) to change

with or on the Omnipad. (The

cursor shows the digit or sign selected.)

2. Enter a figure at each digit by hitting the

Omnipad at

or

. The example

below shows the DISTANCE RUN

DISPLAY menu, where you may adjust

the distance run indication for SET.

DISTANCE RUN DISPLAY

DATA DISPLAY
CONTACT CLOSURE
RESET OFF
SET
000000.00nm

ENT

SET

Cursor

3. Press the [ENT] key to conclude.

1.6

Distance Run Operation

The operator may adjust and reset the

distance run indication and select display

method.

1.6.1 Selecting display method

The default setting provides for independent

display and adjustment of the distance run

indication on all displays (display unit,

Digital Indicator, distance indicator).

To show the same distance run indication

on all displays do the following:

1. Press the [MENU] key to open the

menu.