Tascam DM-3200 User Manual

This provides an alphabetical list of the messages 
that you may see on the DM-3200, which provide 
information on the operation that you are performing.

Not all of these messages are error messages. 

“Information” messages, i.e. those which pop up 
briefly and provide information about a change in 
status, etc., are marked with a ●.

“Confirm” messages, where a response may be nec-
essary (usually confirm with the 

 key or can-

cel with the cursor keys) are marked with a 

✔

.

Messages demanding action other than a simple con-
firmation are shown with a (

✖

), but even these do not 

necessarily indicate an error.

MM

●

Already assigned.

The RECORD key has already been assigned to a remote unit.

✖

Automation data and Current Status use 
different Fs.
Press ENTER to continue.

The automation data uses a sampling frequency of a different value from the 
current sampling frequency.

✖

Automation data and Current Status have 
different
timecode types.
Press ENTER to continue.

The automation data uses a timecode of a different frame type from the current 
timecode.

●

Automation data was recalled.

The selected automation data has been recalled into memory.

●

Automation data was stored.

The current automation data has been stored to card.

✔

AUX 1-2 Level
Set up Ch parameters?
Press ENTER to confirm,
or a cursor key to cancel

Used when batch copying parameters from channel to Aux 1-2 settings.