Tascam DM-3200 User Manual

As explained in “Routing” on page 47, internal effect 
inputs and outputs are treated as sources and destina-
tions for routing.

The two screens shown here are examples of how the 
internal routing is used with the internal effects.

In the 

OUTPUT

 routing screen, the Aux sends are 

selected as outputs, and the terminal destination is 
selected as one of the internal effects.

Here, Aux 5 and Aux 6 are selected as aux sends to 
effect 1 (effect 2 would be set up in the same way).

For the return, the 

INPUT

 screen is used. The source is 

set to 

EFF RTN

 (effect return) and channels 17 through 

20 are selected as effect returns.

The 

 key brings up the effect screens, where 

the basic setup of the internal effects is done.

First, an effect is recalled from the preset library, or 
from a setting previously stored on a CF card.

When the effect setting has been recalled, it may be 
used as it is, or edited using the editing screen.

After pressing the 

 key, pressing the POD 2 

switch brings up the effect 1 library, for managing 
the library effects for the first effect loop, and press-
ing the POD 4 switch brings up the effect 2 library, 

for managing the other effect loop (shown in Figure 
6.2, Effect library screen below):