Yamaha RX-Z11 User Manual

You need the following additional equipment to use the multi-room functions of this unit:
• An infrared signal receiver in Zone 2, Zone 3, and/or Zone 4.
• An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in Zone 2, Zone 3, and/or Zone 4 

to the main room (to a CD player or DVD player, for example).

• An amplifier and speakers for Zone 2, Zone 3, and/or Zone 4.
• A video monitor for the second room.

■ Using internal amplifier of this unit

To make the system of the example, connect the speakers in the 
main zone and other zones as follows:

You can assign the following speaker terminals to Zone 2, Zone 3, 
and/or Zone 4 freely.

Important safety notice
The speaker terminals of this Receiver should not be connected to a Passive Loudspeaker Selector Box or more than one loudspeaker per 
channel.
Connection to a Passive Loudspeaker Selector Box or multiple speakers per channel could create an abnormally low impedance load 
resulting in amplifier damage. See this owner’s manual for correct usage.
Compliance with minimum speaker impedance information for all channels must be maintained at all times. This information is found on 
the back panel of your Receiver.