Yamaha RX-Z11 User Manual

This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust 
and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your 
listening environment.

• The settings you make are reflected next time you press BMASTER ON/OFF inward to the ON position to turn on this unit (see page 43).
• Only BMASTER ON/OFF and MPROGRAM are effective while you are using the advanced setup menu.
• All the other operations cannot be made while you are using the advanced setup menu.
• The advanced setup menu is only available in the front panel display.

Press B

MASTER ON/OFF on the front panel to 

Press and hold M

PROGRAM and then press 

B

MASTER ON/OFF inward to the ON position to 

turn on this unit.
Press and hold 

MPROGRAM until “ADVANCED SETUP” 

appears in the front panel display.

Rotate the M

PROGRAM to select the parameter you 

want to adjust.
The name of the selected parameter appears in the front panel 
display.

Push M

PROGRAM repeatedly to change the 

Press B

MASTER ON/OFF to release it outward to 

y
The settings you made are reflected next time you turn on this unit.

■ Speaker impedance

Use this feature to set the speaker impedance of this unit so that it 
matches that of your speakers.

■ Remote sensor

Use this feature to activate or deactivate the signal-receiving 
capability of the remote control sensor on the front panel of this 
unit.

We recommend setting the parameter to “ON” in most cases.

A D V A N C E D S E T U P

ΩMIN

Select this setting to set the speaker impedance to 8

Ω. 

The impedance of each speaker must be 8

Ω or higher.

6

ΩMIN

Select this setting to set the speaker impedance to 6

Ω. 

The impedance of each speaker must be 6

Ω or higher.

Select this setting if you want to activate the signal-
receiving capability of the remote control sensor.

Select this setting if you want to deactivate the signal-
receiving capability of the remote control sensor.