Yamaha RX-Z11 User Manual

Press J

MEMORY (or 0MEMORY) to set the 

selected XM Satellite Radio channel as a preset 
channel while the MEMORY indicator is flashing.
A colon (:) appears next to the preset channel number for 
confirmation, and the MEMORY indicator turns off in the front 
panel display.

 

Once you set a new preset channel, the one previously stored in the 
same preset channel group and number is cleared.

You can display the XM Satellite Radio information (such as 
channel number, channel name, category, artist name, or song title) 
for the currently selected channel in the front panel display or video 
monitor.

If a status message or an error message appears in the front panel display or 
video monitor, see the “XM Satellite Radio (U.S.A. and Canada models 
only)” section in “Troubleshooting” on page 146 for appropriate remedies.

■ Displaying the XM Satellite Radio information in 

Press I

DISPLAY (or KDISPLAY) repeatedly to toggle 

y
• You can set the front panel display mode by using the “Scroll” parameter 

in “Front Panel Disp.” (see page 112).

• If the XM Satellite Radio information contains a character that cannot be 

recognized by this unit, the character will be displayed with a space.

■ Displaying the XM Satellite Radio information in 

Press I

DISPLAY or (KDISPLAY).

The following information screen is displayed in the video monitor.

y
• To turn off the displayed information screen, press IDISPLAY (or 

KDISPLAY) again.

• You can set the time for which the XM Satellite Radio information is 

displayed in the video monitor by using the “On Screen” parameter in 
“Manual Setup” (see page 108).

• To hold the XM Satellite Radio information screen, press 9ENTER on 

the remote control while it is being displayed in the video monitor.

• The XM Satellite Radio information screen on hold is released if you press 

9ENTER on the remote control again or if you change the XM Satellite 
Radio channel.

• This unit can save up to two XM Satellite Radio information screens for 

future reference. To view the previous two XM Satellite Radio information 
screens, press 8TITLE on the remote control repeatedly while the current 
XM Satellite Radio information screen is being hold.

• The current XM Satellite Radio reception level appears on the top of the 

XM Satellite Radio information screen. For the best reception, adjust the 

orientation of the antenna of Home Dock so that “

” or “

” is 

displayed here. “no signal” is displayed if Home Dock is not connected to 
this unit. In this case, check the antenna connections (see page 74). 

• You can display the XM Satellite Radio information in the Zone video 

monitor (see page 141).

Before performing the following operations, set the operation mode 
selector on the remote control to FSOURCE and then press 3XM.

C 5 : [ 0 4 3 ] X M U

[ 0 4 3 ] X M U

< C A T > R o c k

C o l d p l a y / S p e